Windshield Sticker Installation 

1. Clean and dry the inside of your windshield with rubbing alcohol or windshield cleaner.
2. Position your pass on the inside glass of the front windshield just behind the rearview mirror, without obstructing the driver’s view. Place it below any metalized sun strips or visor tints. If your windshield is metalized, contact the Port ofice at 541-386-1645 for instructions.
3. Peel backing and affix to inside of windshield. Ensure the decal is aligned straight horizontally and smooth it flat.
4. DO NOT attach to back of mirror.

The BreezeBy pass is not designed to be moved between vehicles. Do not attempt to remove or adjust the pass after installation as it will become damaged and unusable.

Motorcycle Sticker Installation

1. Clean and dry your headlight with rubbing alcohol or windshield cleaner.
2. Position your motorcycle pass in the center of the headlight. It should be placed 3 inches from the bottom of the metal reflective layer.
3. Peel off the backing and stick the pass in place, smoothing it flat and horizontal.

The BreezeBy pass must be mounted on the headlight and cannot be relocated. Do not attempt to remove or adjust the pass after installation as it will become damaged and unusable.

License Plate Installation

1. Remove the screws from your front license plate area.
2. Hold the pass so that the flat side is away from you and holes are at the top.
3. Position the pass so it covers the top front of your license plate. The plate should be between the pass and bumper. Align the screw holes with plate holder holes.
4. Fasten the pass to the bumper using the mounting screws.

If your vehicle does not have a front license plate, install the pass where license plate would normally be mounted.